Kingston 64GB (2x32GB) DDR5 6000MT/s CL30 FURY Beast White EXPO - 64 GB (2 X 32GB) - DDR5-6000/PC5-48000 DDR5 SDRAM - 6000 MHz Dual-rank Memory - CL30 - 1.40 V - Non-ECC - Unbuffered - 288-pin - DIMM - Lifetime Warranty
Kingston 64GB (2x32GB) DDR5 6000MT/s CL30 FURY Beast White EXPO - 64 GB (2 X 32GB) - DDR5-6000/PC5-48000 DDR5 SDRAM - 6000 MHz Dual-rank Memory - CL30 - 1.40 V - Non-ECC - Unbuffered - 288-pin - DIMM - Lifetime Warranty
Kingston 64GB (2x32GB) DDR5 6000MT/s CL30 FURY Beast White EXPO - 64 GB (2 X 32GB) - DDR5-6000/PC5-48000 DDR5 SDRAM - 6000 MHz Dual-rank Memory - CL30 - 1.40 V - Non-ECC - Unbuffered - 288-pin - DIMM - Lifetime Warranty
Photo is for Illustration purposes only. Actual Product may be different. Part Num:
KF560C30BWEK2-64Condition: Brand New$300.95
Add To Cart
BUY MORE & SAVE
Need 5 or more of these on a single order?
Ask for a quotation here.
We generally respond within 3 business hours.
Close
Total price is... Ships same business day
Key Highlights
• 6000 MHz memory speed with Unbuffered signal for great multitasking capability
• DIMM 64 GB of memory to maintain symmetry with processor and hard drive and bring out the ultimate computing experience
• With DDR5 SDRAM get efficient data transfer rate and enhanced computer`s performance
Kingston FURY KF560C30BWEK2-64 is a kit of two 4G x 64-bit (32GB) DDR5-6000 CL30 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 2G x 8-bit FBGA components per module. Each module kit supports AMD® EXPO v1.1 and Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 64GB. Each module has been tested to run at DDR5-6000 at a low latency timing of 30-36-36 at 1.4V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:
FACTORY TIMING PARAMETERS
- Default (JEDEC): DDR5-4800 CL40-39-39 @1.1V
- EXPO Profile #0: DDR5-6000 CL30-36-36 @1.4V
- EXPO Profile #1: DDR5-5600 CL40-40-40 @1.25V
- XMP Profile #1: DDR5-6000 CL30-36-36 @1.4V
- XMP Profile #2: DDR5-5600 CL40-40-40 @1.25V
FEATURES
- Power Supply: VDD = 1.1V Typical
- VDDQ = 1.1V Typical
- VPP = 1.8V Typical
- VDDSPD = 1.8V to 2.0V
- On-Die ECC
- Height 1.37" (34.9mm), w/heatsink
General Information
|
Manufacturer | Kingston Technology Company |
Manufacturer Part Number | KF560C30BWEK2-64 |
Manufacturer Website Address | https://www.kingston.com |
Brand Name | Kingston |
Product Line | FURY Beast |
Product Name | 64GB (2x32GB) DDR5 6000MT/s CL30 FURY Beast White EXPO |
Product Type | RAM Module |
Technical Information
|
Memory Size | 64 GB |
Memory Technology | DDR5 SDRAM |
Memory Voltage | 1.40 V |
Number of Modules | 2 X 32GB |
Memory Speed | 6000 MHz |
Memory Standard | DDR5-6000/PC5-48000 |
Memory Rank | Dual-rank |
Error Checking | Non-ECC |
Signal Processing | Unbuffered |
CAS Latency | CL30 |
Physical Characteristics
|
Number of Pins | 288-pin |
Form Factor | DIMM |
Thickness | 0.26" (6.62 mm) |
Width | 1.37" (34.90 mm) |
Length | 5.25" (133.35 mm) |
Miscellaneous
|
Environmentally Friendly | Yes |
Environmental Certification | Hazard Assessment of Perfluorooctane Sulfonate (PFOS) |
Environmental Compliance | Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) | Waste Electrical and Electronic Equipment Directive (WEEE) | Restriction of Hazardous Substances (RoHS) |
Warranty
|
Limited Warranty | Lifetime |