4K/UHD HDMI Over 100M HDBaseT Receiver with Control and PoE The Atlona AT-UHD-EX-100CE-RX is a 4K/UHD HDMI over 100M HDBaseT™ receiver for AV signals up to 328 feet (100 meters) over category cable with Ethernet pass through, RS-232 and IR control, plus Power over Ethernet. It is compatible with signals up to 4K/UHD @ 60Hz with embedded multi-channel audio and remote 48V power for the receiver. The receiver works with the PRO3-UHD Matrix Switcher Series* to provide RS-232, and 12 volt-based IR control commands. The AT-UHD-EX-100CE-RX is HDCP 2.2 compliant and supports EDID communication. The receiver features a quarter rack width metal enclosure for installation with rear panel I/O ports for uncluttered wire management. Use with an optional AT-IR-CS-RX IR receiver cable to capture IR remote commands for AV system control.
Ideal for Atlona Switchers with HDBaseT Outputs The AT-UHD-EX-100CE-RX is designed to be used with Atlona products with built-in HDBaseT transmission such as the AT-UHD-CLSO-601, UHD-PRO3 matrix switcher series, and the AT-UHD-SW-52ED switcher. It is uniquely designed to take advantage of these products' built in HDBaseT transmission of AV, remote power, and control signals.
This receiver is used in commercial and applications that call for an HDBaseT receiver with a compact form factor that allows for simple mounting behind displays and at projectors. These applications will not require an AC outlet for the receiver, since the receiver is powered by the Atlona switching product. This receiver will also be used to simplify control of the AV system by working with 12 volt-based IR receivers as well as passing through Ethernet and RS-232 commands.
